Deco M5 and OOMA
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I have recently upgraded my home wifi and went from an Asus router to a DecoM5.
The setup went just fine however the house phone which is the VoIp service Oooma is not working at all. I have plugged my old router back it's back on.
There are no special settings that I had on my old router(port fwding..etc) it simply works.
Since this is kind of a deal breaker for me I was hoping that someone could help me and tell me what is going on or else I will have to send it back since I cannot use my phone.
The setup is very simple: Cable Modem(dumb modem not router combo) - DecoM5- Switch (TP link 8 port)
From the switch I have few other things connected: PC, printer, IP Camera etc They all work fine except the Oooma box who cannot get on the Internet and goes offline.
Any suggestions would be appreciated
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you for taking your time and reply.
The issue was something that I have figured out eventually. I have previosuly assigned a static ip to the Ooma in the range of 192.168.1.x and I forgot.
I have changed two routers since but luckily both matched my subnet range.
All I had to do was to match the Deco to the Ooma and change the weird,sorry :):), 192.168.68.1 to 192.168.1.1
Thank you again everything is working fine now.
- Copy Link
- Report Inappropriate Content
Hello, what is the current network diagram? How do you connect the Oooma box to the Deco M5? By wired cable or wireless?
What is the IP address and gateway obtained by it? Can other devices in the local network can ping it?
Try to disable fast roaming, and setup QoS as standard and remove the high priority rules.
Besides you can try to disable the firewall/anti-virus software on the Deco app and enable SIP-ALG to give it a go.
In the mean time, it is suggested to contact the tech support of the Oooma box to get some specific help cause they are more professional about their products.
Good day.
- Copy Link
- Report Inappropriate Content
Hello,
The network diagram is:
Cable modem(Technicolor TC4400)- DecoM5- TL-SG108 8-Port -Ooma
Everything is wired in with Cat6. Needelss to say that I tried few other cables just to rule that out
Ooma never appears in the Deco DHCP table yet it does on my old Asus route. The rest of the devices (pc etc) come online right away
Any ideeas why?
Thank you
- Copy Link
- Report Inappropriate Content
Hello, please simplify the networkd diagram first, in other word, please connect the Ooma to the Deco M5 directly, bypass the TL-SG108. Then please verify whether it shows up under DHCP client list.
Still the same, please check the IP address and gateway of Ooma and confirm whether it is assigned by the Deco M5.
Try to hard reset the Ooma box to give it a shot as well.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
Thank you for taking your time and reply.
The issue was something that I have figured out eventually. I have previosuly assigned a static ip to the Ooma in the range of 192.168.1.x and I forgot.
I have changed two routers since but luckily both matched my subnet range.
All I had to do was to match the Deco to the Ooma and change the weird,sorry :):), 192.168.68.1 to 192.168.1.1
Thank you again everything is working fine now.
- Copy Link
- Report Inappropriate Content
Thanks for your valued reply, glad to hear that you figured it out finally.
Now you can enjoy the internet with the Deco M5.
And if need more help in the future, do not hesitate to contact us.
Have a nice day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2016
Replies: 5
Voters 0
No one has voted for it yet.