Home Network Community > 5G/4G Wi-Fi Routers/MiFi > TP-Link TL-MR6400 4G go to sleep??
< 5G/4G Wi-Fi Routers/MiFi

TP-Link TL-MR6400 4G go to sleep??

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link TL-MR6400 4G go to sleep??

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link TL-MR6400 4G go to sleep??
TP-Link TL-MR6400 4G go to sleep??
2019-07-24 07:16:30 - last edited 2019-07-24 07:27:56
Model: TL-MR6400  
Hardware Version:
Firmware Version:

Hi!

 

My problem is that the TP-Link TL-MR6400 4G router needs to be restarted every morning to have a net on it. There are 3 other routers with the same configuration but only 1 device is affected!

 

What is the problem???

 

Attached image of the router when there is no net and when there is!

 

 

  2      
 
  2      
 
#1
Options
8 Reply
Re:TP-Link TL-MR6400 4G go to sleep??
2019-07-25 03:42:31 - last edited 2019-07-25 03:43:03

@Szinjozan 

 

From the pictures attached, there is no difference on the led status. 

 

It seems that this unit has unstable connection and need restart to make it work every morning. 

 

We can do some troubleshooting and try to fix it:

1. With your computer connected to the MR6400 when it stops working, please click here to get the IP address and gateway.

2. Then please login to the web UI of the MR6400 and take a picture of the status page.

3. Besides, please go to advanced-system tools-system log page, click save log and send the txt file to us.

 

You can create a profile manually for the MR6400 to check the stability.

Note: Go to advanced-network-internet page, click "create profile" to do that. 

 

Any updates, please let us know. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-09-21 09:04:15
Hello, did the problem solved? I have the same problem Connection disconnected if no one uses the internet.
  0  
  0  
#4
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-09-21 14:26:01

@Szinjozan   same here with the mr400 :(

  0  
  0  
#5
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-10-13 13:51:23

Hello,

 

is there any solution for this Post? I have same issue with MR6400 works all day but morning when I get up and look on internet it show signal as it is connected to Wifi, but no loading webpages, no internet. Once I reboot router it works perfectly again. I do not fancy rebooting router every day, or not really fun to set up automatic reboot during every night.

When was there last Firmware upgrade? It shows me it is up to date. I bought it only last week and on TP link webpage seems last update was back in 2015 if I am not mistaken so I should have latest firmware I believe.

  0  
  0  
#6
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-11-05 08:02:16

@Szinjozan 

 

Hi, I have the same problem. Need to restart the device, don't know when it goes to "sleep"

This cases also problem that ypu can not log in iPhone app "Tether"

  0  
  0  
#7
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-11-05 11:13:18

@Pasi_Helin 

Hi, thanks for your patience.

May I know the hardware and firmware version of TL-MR6400?

How long have you had the device and when did this issue start?

Are you still able to detect the 6400 on the APP but failed to log In, or there is no local device at all? would there be any error message?

Have you tried to set up a reboot schedule on the modem to have a look?

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#8
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-11-05 17:11:18

@Sunshine hello, curently I am not able to validate firmware as I am not at that location but I purchased device 1 month ago and there is manufacturer firmware as this was first thing I checked at TP-link webpage to update to newest Firmware. There seems to be no new firmware, last was i think in 2016 and that was the only one released to my knowledge. So believe my device has this firmware loaded but I can validate later on. I setup automatic reboot at 5am everyday so once I get up at 6am it will work, but no luck I still have to power down and up manually to work. After reboot in the morning it works , once return from work it does not and need manual restart to work again. It is little bit weird to me and annoying keep restarting manually everytime but I believe it will be fixed somehow soon. I am reading forums, checking videos from users etc. and because i could not wait for long I also opened case with TP-link so in communication already. But would be good to have communication here as well, more eyes , more solutions to get it work. If it works or not there is still Band 1 set and WCMDA as network type that is what it shows. I have 4G prefered set also, there is low signal 4G where the device is located but it should keep switching seamlessly between 4G and 3G so should not get stuck somewhere and stop working as it is not hardcoded to 4G only or 3G only. By the way only Internet connection does not work on connected devices, but log to the device is successful via PC connected directly and it shows connected mobile within Setting like Mobile phone, tablet etc. . Ping internally works as well, only outside to internet does not work like ping of any website. ...

  1  
  1  
#9
Options
Re:TP-Link TL-MR6400 4G go to sleep??
2020-11-05 17:25:19

@Sunshine 

 

The version is:

 

Firmware Version:1.2.0 0.9.1 v0001.0 Build 200511 Rel.44954n Hardware Version:Archer MR600 v1 00000001 

 

I have had the MR600 for few weeks, I have it in my office and have now noticed few times that I need to restart the router. Then all works

fine, but seems like it goes to sleep sometimes. I will keep an eye on how often it happens.

 

 

  3  
  3  
#10
Options

Information

Helpful: 2

Views: 3836

Replies: 8

Related Articles
TP LINK TL-MR6400 V4 4G BAND SELECTION
11115 2
AUTO FAILOVER in TP LINK TL-MR6400
6144 0
 TP-Link TL-MR6400 Router with KASER Antenna 4G LTE
290 0
 TP-Link TL-MR6400 - Antennas
561 0
 tp-link TL-MR6400 freezing
1814 0
Unable to connect mobile devices to Wi-Fi on TP-Link TL-MR6400
162 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.