New Deco M5 stopped working after latest download
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Installed 3 Deco M5's a month ago and all worked first time. Very pleased with network in my house. Yesterday afternoon, downloaded latest firmware update and wireless network then went off line. Checked with Plusnet provider this morning - no problems at their end and Broadband connection working fine on hard-wired I-Mac. Eventually, 're-set' all 3 M5's and re-installed network from scratch. However, although network is showing as operative, no data is being donloaded. Any ideas please?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the current light status of the 3 Deco? Are they all solid green?
With modem connected to the main Deco only, please connect your computer to the main Deco and test whether you can access internet; then click here to check its IP address and default gateway.
Meanwhile, what is the current internet IP address and gateway obtained by the main Deco? You can find them via the Deco app.
Besides, try to reboot the modem and all the Deco units to give it a go.
- Copy Link
- Report Inappropriate Content
Thank you for your help. All the Decos were on 'green' however, problem solved. It seems that the update had changed the internet source from my modem to Deco's own. When I delved down and found the switching choice and changed back to 'bridge modem', all started to work fine.
Kind regards.
- Copy Link
- Report Inappropriate Content
Glad to hear that it was resolved finally, thanks for your feedback.
Any further problem, do not hesitate to contact us.
Wish you enjoy the internet with the Deco nodes.
- Copy Link
- Report Inappropriate Content
Found today, 2 days after doing update, one of my M5s was showing offline/disconnected from other M5s.
Soni unplugged, waited approximately 10 secs, plugged back in, and it now looks completely dead. No light coming on.
- Copy Link
- Report Inappropriate Content
Hello, what is the firmware version you installed?
Try to reboot the Deco M5, or change another socket to plug it;
You can hold the reset hole for 1s with the Deco powered on and verify whether it works.
Besides, may I know when did you buy this Deco M5?
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2430
Replies: 5
Voters 0
No one has voted for it yet.