Home

Forums

Stories

Knowledge Base

Home Network Community > Powerline Adapters > TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

< Powerline Adapters

TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

patchworks101

2019-07-03 14:40:06

Posts: 4

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2019-07-03

TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

2019-07-03 14:40:06

Model: AC50

Hardware Version: V3

Firmware Version:

I have 2 powerline TL-PA4022 which worked fine with my TP-Link C50 router providing wifi throughout the rest of our house. They were working fine until I added a TP-Link eap110-outdoor wifi access point. The instant I configured the eap and was receiving an excellent wifi signal 50m from the house, the powerline adaptorsstopped working. There is power to both, but the powerline light is not lit on either. I have tried re-pairing them - nothing happened. I've tried a factory reset - no change. The light for the powerline refuses to light up.

Any ideas please?

Thanks

3 Reply

Kevin_Z

2019-07-04 02:38:41

Posts: 21773

Helpful: 5144

Solutions: 2574

Stories: 21

Registered: 2018-12-24

Re:TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

2019-07-04 02:38:41

Hi,

What is the current network topology? Do you connect the EAP110-Outdoor to the powerline adapter or to the main router directly?

To avoid the interference, please connect the EAP110-Outdoor to the main router, bypass the powerline adapters.

Then you can follow the instruction to pair them:

1. Power cycle them and pair them via the pair button. https://www.tp-link.com/support/faq/258/

2. Download the tpPLC utility and use it to pair them. https://www.tp-link.com/support/faq/1615/

3. Or you can create the same network name for both to pair them: https://www.tp-link.com/support/faq/1616/

To do a comparison analysis, you can power off the EAP110-Outdoor and then pair them.

Besides, when and where did you buy it?

Nice day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

patchworks101

LV1

2019-07-04 06:45:45

Posts: 4

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2019-07-03

Re:Re:TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

2019-07-04 06:45:45

Bothe the eap and the powerlines are connected by their own ethernet cables directly to the router. The loss of connection only occurred when I installed the eap.

I have since taken the powerlines to another room, re-paired them and they now appear go be working.

Thanks

Kevin_Z

2019-07-04 11:05:34

Posts: 21773

Helpful: 5144

Solutions: 2574

Stories: 21

Registered: 2018-12-24

Re:Re:Re:TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

2019-07-04 11:05:34

Thanks for your feedback.

Glad to hear that they are working for now.

You can take more time to test its performance. Any updates, just get back to us.

TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

TL-PA4220 + EAP110-outdoor+ Archer c50 now won't talk

Information

Voters 0

Tags