Internet working in one TP-Link router, not working in a new TP-Link A6 router.. ? help!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Helping my mother with her new internet in a area where internet isnt available, we bought her a TP-Link Archer A6 for 39$, I brought my old TP-Link Archer C9 out just incase.
Using the newer router she has the a6, the tether app setup worked and we set dynamicIP,no clone etc, but it cannot connect to her internet. The globe icon is orange. After numerous factory resets we gave up.
I hooked the C9 i had to it and did not need any setup, and it just worked, all blue lights, wifi worked, 16mbps, wired works, shes happy. We returned the a6 to amazon for replacement thinking it was a bad router, turns out the new one can't connect to internet either. Wtf?
We connected to the routers own network to run setup in Tether, did it all by the book, and it never could see internet. I'm not a complete newcomer to routers and stuff as a gamer, but I was just stumped and couldnt think of what to do, I hooked the archer c9 back up and all is well called it a day.. Is there anything I can do or anyone have any advice? I'd really like her to use a newer router, as her house may be a enemy with having a tin roof and all. We also want to Nanostation her wifi around 150ft to share with relatives.https://solitaire.onl/ https://9apps.ooo/ https://bluestacks.vip/
thanks for any advice!
With a web-based utility, it is easy to configure and manage the router. The web-based utility can be used on any Windows, Macintosh, or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, or Apple Safari. It is a built-in internal web server that does not require internet access. It does, however, require your device to be connected to the router. This connection can be wired or wireless.
Note: Low version of your web browser may cause compatibility problems with the web-based utility(management page) of your device, such as unable to log into the interface, display incomplete features, etc.
Follow the steps below to log in to your router.
1. Set up the TCP/IP Protocol to Obtain an IP address automatically mode on your computer.
2. Visit http://tplinkwifi.net, and create a log in password for secure management purposes. Then click Let’s Get Started to log in.
Note:
If you have registered a TP-Link ID and bound your cloud router to it, the login password you created here will be ineffective. Please log in to the cloud router using your TP-Link ID.
The default access address differs by model. Please find it on the bottom label of the product.
If you forget the password please reset the router to factory default by pressing the reset button/hole on the router.
