TL-WR710N - 5 set up on private network - 2 are unreliable/require daily restart
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
I have 5 TP-Link TL-WR710N Hardware V2, set up on my network as Access Points in France.
#1 and #2 are highly unreliable, requiring daily power off/on, and have firmware version 3.15.12 Build 140114 Rel.55132n. One of them is no longer used.
#3, #4, #5 require a power off/on once a week to continue to work, and have firmware version 3.16.12 Build 150507 Rel.60955n
Having tried many configurations and settings, the current configuration is:
Working Mode: Access Point
LAN: Smart IP (DHCP)
WAN: Auto channel/ WPA/WPA2
DHCP: Disable.
Q1: Its a mystery to me why they work for a while, and then people start to say that they can no longer connect.
Does anyone know why the Wifi adaptors "hang" or freeze rather than work indefinitely like a traditional modem
Q2: I have not managed to locate a site for the firmware updates, as this may be the reason why #1 and #2 don't work.
Thanks in advance
Stephen
Hi SMC：
TL-WR710N is so old, I have one, But I have not used it for long time
For your case, I suggest you contact tp-link technical support engineer directly, Maybe this is the known issue
This is B2B community, so I think there are few person can helo you.
PS: I remember the TL-WR710N only supports 150Mbps. You need change other better router, as TL-WR902AC.