TL-WR710N(UK) Ver: 1.1 overwritten with TL-WR710N(EU) V1.
Hi,
I stupidly updated firmware on TL-WR710N(UK) Ver: 1.1 with firmware for TL-WR710N(EU) V1. I'm not hoping for much at this point...
AP works fine, default ssid works and routes internet correctly but the web interface got a lot of issues.
When I go to the IP address of the AP the Quick Setup page comes up, it's slow but it works fine.
None of the below links works,
Status | http://192.168.0.254/userRpm/StatusRpm.htm |
Quick Setup | http://192.168.0.254/userRpm/WzdStartRpm.htm |
WPS | http://192.168.0.254/userRpm/WpsCfgRpm.htm |
Working Mode | http://192.168.0.254/userRpm/WorkingModeRpm.htm |
Network | http://192.168.0.254/userRpm/WanCfgRpm.htm |
Wireless | http://192.168.0.254/userRpm/WlanNetworkRpm.htm |
DHCP | http://192.168.0.254/userRpm/LanDhcpServerRpm.htm |
USB Settings | http://192.168.0.254/userRpm/NasCfgRpm.htm |
Forwarding | http://192.168.0.254/userRpm/VirtualServerRpm.htm |
Security | http://192.168.0.254/userRpm/BasicSecurityRpm.htm |
Parental Control | http://192.168.0.254/userRpm/ParentCtrlRpm.htm |
Access Control | http://192.168.0.254/userRpm/AccessCtrlAccessRulesRpm.htm |
Advanced Routing | http://192.168.0.254/userRpm/StaticRouteTableRpm.htm |
Bandwidth Control | http://192.168.0.254/userRpm/QoSCfgRpm.htm |
IP & MAC Binding | http://192.168.0.254/userRpm/LanArpBindingRpm.htm |
Dynamic DNS | http://192.168.0.254/userRpm/DdnsAddRpm.htm |
System Tools | http://192.168.0.254/userRpm/DateTimeCfgRpm.htm |
and if I change .htm to .html in above urls, I get below error:
You have no authority to access this router!
Maybe in EU version some web interface files changed, if anyone got this router can you check? Or is there any way to upgrade firmware back to the original one?