Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Archer MR200 - Can't VPN!
< 5G/4G Wi-Fi Routers/MiFi

Archer MR200 - Can't VPN!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR200 - Can't VPN!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR200 - Can't VPN!
Archer MR200 - Can't VPN!
2018-03-20 02:57:04
Model :

Hardware Version :

Firmware Version :

ISP :

Last week I bought a pair of MR200 V2 because I need to setup a VPN between 2 locations.
I installed the SIM cards everything is working fine, connected to the Internet via 4G, downloaded the latest firmware directly from the router upgrade page and firmware now is : 1.3.0 0.9.1 v004a.0 Build 180117 Rel.47657n
Since my Internet connections aren't static, I setup two ddns.net accounts one for each and they're both working fine and connected to the ddns service.
I then proceeded to setup the VPN by reading the instructions on the manual and I believe that I did it correctly. Below are the screen shots from both units (Local is the bigger one and Remote the smaller)






The VPN doesn't connect no matter what I tried!
Am I missing something or done anything wrong?
Regards,

Ted
  0      
 
  0      
 
#1
Options
8 Reply
Re:Archer MR200 - Can't VPN!
2018-03-20 17:26:41
when you login the web ui of MR200, what is the internet ip there? it is the same as what's ip website?
maybe you can try ip address for remote ipsec gateway.
  0  
  0  
#2
Options
Re:Archer MR200 - Can't VPN!
2018-03-21 01:19:05
Thank you for the reply.
If I ping the ddns.net it does return the WAN ip address that it shows in the web ui as you called it, in the basic first page of the unit.
I have tried it with the IP instead of the ddns.net URL in the VPN config. It still doesn't work!
  0  
  0  
#3
Options
Re:Archer MR200 - Can't VPN!
2018-03-22 16:28:21
here is an instruction for your reference: https://www.tp-link.com/en/faq-1661.html
If it still doesn't work, you 'd better contact technical support team for futher help
  0  
  0  
#4
Options
Re:Archer MR200 - Can't VPN!
2018-03-23 01:02:42
Thank you very much for the help and info my friend... I have seen and followed that page to the letter and it doesn't connect!

you 'd better contact technical support team for futher help


I have contacted them TWICE about a week ago and they just don't reply... Or maybe they JUST don't care?!

Regards

Ted
  0  
  0  
#5
Options
Re:Archer MR200 - Can't VPN!
2018-03-28 14:39:11
which support did you contact?
is it the one here?
https://www.tp-link.com/gr/support-contact.html#Hotline-Support
  0  
  0  
#6
Options
** solved **
2018-04-03 19:25:58
Seems that there is a bug in the firmware after all and although the VPN is working and it is UP... The status is still showing DOWN.
In order for it to change to UP you 'll have to PING it first... After successful pinging the status changes to UP!

Tech support is already informed about it.

Regards,
  0  
  0  
#7
Options
Re:Archer MR200 - Can't VPN!
2018-04-05 00:47:52

4gltemall wrote

What's the current firmware of the Archer MR200 router?


1.3.0 0.9.1 v004a.0 Build 180117 Rel.47657n
  0  
  0  
#9
Options
Re:Archer MR200 - Can't VPN!
2020-02-14 08:06:49

@tpapas 

Hi

I hope you are fine

I noticed in the picture that the pre-shared key is empty

Try to put one in both routers

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 8666

Replies: 8

Related Articles
 vpn for Archer mr200
1819 0
 Archer MR200 can't connect
1263 0
Connect Archer mr200 v5.20 to VPN Client
961 0
 Archer MR200 VPN failure
1334 0
 Archer MR200 not allowing VPN passthrough
2416 1
 TP-Link Archer MR200 \ VPN
653 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.