Archer VR2800 drops internet connection multiple times a day but maintains local network connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hardware Version :
Firmware Version :
ISP :
I have bought a new Archer VR2800 router about 3 weeks ago, which drops its internet connection multiple times a day for approximately 5 mins or so (length of time seems to vary). However, all the wifi and Lan connections remain up and working. It's only the actual internet that is down. The DSL line is up the whole time. The logs show nothing helpful and no errors present. If I remote into the webpage interface of the router (either wirelessly or Lan connection) I can get into it just fine, but where it shows the internet status it just says 'disconnected'. If I leave the router for 5 mins or so, the internet connection reconnects on its own with no intervention. If I restart the router it will also come back.
Raised a support case with TP-Link, who so far told me to switch off "Bit swap" in advanced settings. This did not work. Waiting to hear for something else to try.
I suspect though, that my router is simply defective and needs replacing.
Anyone else having these issues?
My old ISP router has none of these issues whatsoever, so It's not the DSL line.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
ogero wrote
Do you, by chance, have QoS enabled?
If so, try disabling it, I used to have the exact same issue on mine, and noticed QoS is totally broken on this device.
When disabling it I faced no more those issues.
Offtopic Rant: But a new one arised; now sometimes, when a wireless device is hogging up the dsl bandwith, no other device (wlan or lan) is able to even get a DNS resolution.
If I could return this device, I would do it without thinking it twice.
my QoS is disabled (by default), but the problem is still there.
- Copy Link
- Report Inappropriate Content
Good day.
Thank you very much for your time and patience.
Sorry for the delay.
Since there are many feedback about the unstable issue about the Archer VR2800, please help us get the following information for further assistance:
- Where are you located and who is your internet service provider?
- How long have you had the device and when did the issue start?
- Did both the wireless connection and wired connection have the same unstable issue?
- When the internet dropped, would the internet or DSL light turn off or blinking?
- Would there be any error message on the status page, such as please configure the DNS manually?
- If you are on the DSL service, please also help me check the downstream and upstream values under the advanced>status>DSL status;
- And also make sure the current firmware is up to date;
So if anyone who had the same issue, please send an email with the above answers to support@tp-link.com with subject Forum# 103674 Archer VR2800 drops internet connection multiple times a day;
Thank you very much for your understanding and support.
- Copy Link
- Report Inappropriate Content
I have this router 2 weeks and it is the biggest pile of rubbish i have ever paid for, gone back the free ISP provided router.
My issues are
As soon as i move more than 10 feet from the device the singal drops to 2 bars
Devices constanatly disconnect and reconnct to the wifi
If once device is using a lot of bandwidth, all over devices stop and lose connection.
I am on plusnet and with thier router installed I have no isses what so ever. Restart and reset many time and on the latest firmware, but still a peice of crap.
Really wish i had kept the box as it would be getting returned for sure. It is now being used at a £150 paper weight!!!!
- Copy Link
- Report Inappropriate Content
Have you updated the modem firmware to the latest, then reset and reconfigure it from scratch to confirm if the connection will more stable?
https://www.tp-link.com/support/download/archer-vr2800/#Firmware
Just to verify, only the wireless connection disconnects on the VR2800? How about the wired connection, will the internet drop if you connect a computer to the modem with an Ethernet cable? Ensure the DSL light and internet light on the VR2800 is correctly on/flashing.
If the wired connection is stable, but the wireless is not, please then check if both the 2.4G and 5G are giving you an issue, try to modify the wireless settings on the VR2800, such as wireless channel and channel width to find a clear one, you may install a Wi-Fi analyzer to check the channel.
Thanks a lot.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_z
Yes I am at the latest firmware and have reset many times and was still getting the issue until I worked out that when my NAS was doing a large backup the my cloud storage it would hog all the bandwidth and stop everything else from working. So i put a limit on how much it can use and seems to be more stable than before.
Never happen with my old router???
- Copy Link
- Report Inappropriate Content
I went back to my VR2800 today after my BT Hub died in a thunderstorm recently. And started to get those extremely annoying regular internet drop-outs again. But I remembered reading another thread a while ago that setting up static DNS addresses to connect to the ISP was one cure for this inability to hold a connection for very long. I have done this, and it has -- touch wood -- worked so far, as I haven't had another lost connection this morning.
Advanced tab > Network > Internet ... then click on the edit icon under "Modify" for your Internet connection.
Scroll down to the bottom of Internet Connection Setup and click on the down arrow next to 'Advanced'.
At "Use the Following DNS Addresses" click Enable. Add in the Primary and Secondary DNS addresses for your internet service provider (62.6.40.178 and 62.6.40.162 for BT).
Save.
- Copy Link
- Report Inappropriate Content
ok none of this worked for me, I still get 2.4ghz drop, and the vdsl drop.
so I am posting as I think I had another cause, I found an faq on tp link support for the archer 2800, indeed I have a powerline adapter plugged in 12 inches from the router, I have moved it to 5 feet away and we're ok so far.
you may have the option to disable the offending wireless issue on the adapter, I didn't as it's the 600mb job from currys.
cheers
- Copy Link
- Report Inappropriate Content
I did not expect to need advanced qualifications in IT to get this VR2800 to run properly. I'm of the generation where IT is a foreign subject so when I buy a device with easy set up , I expect it to be easy. Has any one successfully resolved this issue?
- Copy Link
- Report Inappropriate Content
@unfcukinghappy same here. back on plusnet router which works fine. biggest waste of money...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 19598
Replies: 51
Voters 0
No one has voted for it yet.