Early Access Pre-release Firmware for Archer AX53/AX58 Supports EasyMesh in AP Mode, Ethernet Backhaul, ECO Mode
Hello Everyone,
We're thrilled to announce the release of the pre-release firmware for Archer AX53/AX58 V1. This firmware update introduces several exciting new functions and improvements to enhance your experience including Ethernet Backhaul, EasyMesh in AP mode, Satellite Router Management, ECO Mode, etc. We encourage you to try out this version of firmware and take advantage of the following features. Your feedback and suggestions are greatly appreciated.
New Features and Modifications:
1. Added Ethernet Backhaul.
2. Added EasyMesh feature in AP mode.
3. Enhanced EasyMesh Satellite Router Management via satellite router web interface.
4. Added EasyMesh Network Topology to gain a clear understanding of your EasyMesh network's structure.
5. Added ECO mode on Advanced->System->ECO Mode page.
When working in Power-Saving Mode or Ultra Power-Saving Mode, your router will reduce the power consumption to save power, please note that your network speed and coverage will be reduced as well.
6. Added IoT Network.
7. Enhanced Wi-Fi Schedule to enjoy more flexibility by setting separate schedules for 2.4GHz and 5GHz Wi-Fi bands.
8. Added isolation of Guest Network and Main Network in AP mode.
9. Added Language options on the top of the web interface.
10. Added support for VPN Client.
11. Added support for WireGuard.
12. Added OpenVPN Server TAP Mode. Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
Note: It requires your OpenVPN Client supporting TAP Mode as well, or you will not be able to connect the VPN Server successfully
13. Added new functions to the Tether App: EasyMesh, OpenVPN Server/Client, Eco Mode, Wireless Schedule, Guest Portal Network
Note: please use the new Tether App to experience those new features: New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
14. Added User Experience Improvement Program (UEIP).
Participate in our UEIP during the Quick Setup process, or enable/disable it later on the Advanced->System->About page. Your feedback will help us enhance the product.
15. Improved client type identification accuracy.
16. Optimized the overall system stability and performance.
Firmware Download:
Before the Upgrade
(1) IMPORTANT!: Once upgraded to the 1.4.x firmware, you CANNOT downgrade back to the 1.3.x or 1.2.x version.
(2) Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
(3) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(4) This pre-release firmware for Archer AX53/AX58 V1 can be applied to all versions (EU/US/AU/KR/etc.).
(5) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(6) The screenshots in this article are taken from the web GUI or Tether App of Archer AX55 V1 for reference.
Direct Firmware Download Link
| Archer AX53/AX58_V1 | Archer AX53/AX58_V1_1.4.3 Build 20250314 (Pre-release Firmware) UPDATED |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Thank you for your continued support and for being part of our community.
Update Log
Apr 11th, 2025:
Update to provide a new 1.4.3 pre-release version.
Related Articles
Product List of Wi-Fi Routers that Support EasyMesh Ethernet Backhaul
What is EasyMesh and how does it work with TP-Link routers and extenders?
EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller
How to Build an Ethernet Backhaul Using Two EasyMesh Routers
Introducing TAP Mode in OpenVPN Server for AX55 V1 Router
New UI for 11AX Routers on Tether App 4.3 version is Ready for Trial
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am not aware of any pre-release firmware for the AX53/AX58 V2.
I also don't know how TP-Link decide which features go into which hardware version of their products first.
Anyway, if you own an Archer AX58 V2, then switch its "Operation Mode" to "Access Point" mode and check whether an "EasyMesh" menu exists or not.
- Copy Link
- Report Inappropriate Content
I don't have an AX58 V2 yet; I only have an AX55 V1 for now.
Look at the information provided on this link. It should be okay for the AX58 V2, right?
https://community.tp-link.com/en/home/forum/topic/593722
EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
| Archer AX58_V2 | Official Firmware |
- Copy Link
- Report Inappropriate Content
Yes, the AX58 V2 supports "EasyMesh Network via Ethernet Backhaul".
But the AX58 V2 apparently does not support EasyMesh in AP mode when used as the main EasyMesh device.
So, if you use the AX55 V1 (with latest firmware) as main EasyMesh device in AP Mode and connect an AX58 V2 via Ethernet cable as satellite EasyMesh device, then this should work.
However, it would not work the other way around, at least until TP-Link adds the EasyMesh in AP Mode feature to the AX58 V2.
- Copy Link
- Report Inappropriate Content
Under these conditions, can the AX55 and AX58 devices function as Wi-Fi access points with efficient inter-AP roaming, even if the AX58 is not configured in AP mode? Regarding routing, another gateway router ensures access to the Internet network.
Finally, when the AX58 V2 is connected via Ethernet cable and configured as an "EasyMesh satellite device", it functions as an access point controlled by the AX55 V1, enabling intelligent roaming via EasyMesh. Is this how it works?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
davidperrin1 wrote
Under these conditions, can the AX55 and AX58 devices function as Wi-Fi access points with efficient inter-AP roaming, even if the AX58 is not configured in AP mode? Regarding routing, another gateway router ensures access to the Internet network.
The feature TP-Link refers to as "EasyMesh in AP Mode as a Controller" is only applicable for the "Main" device in the EasyMesh network. Archer AX55 V1 already supports this, but the Archer AX58 V2 does not. Devices used as EasyMesh Satellite do not require the "EasyMesh in AP Mode as a Controller" feature.
davidperrin1 wrote
Finally, when the AX58 V2 is connected via Ethernet cable and configured as an "EasyMesh satellite device", it functions as an access point controlled by the AX55 V1, enabling intelligent roaming via EasyMesh. Is this how it works?
Yes.
- Copy Link
- Report Inappropriate Content
Hello. I've updated the router from 1.3.1 that had a few slowdowns and small issues to the new 1.4.3 firmware and performance \ UI is pretty fast again. Thank you.
P.S. still hope to see support for DoH and DoT implimented too
- Copy Link
- Report Inappropriate Content
Not sure if related - but I'm unable to connect my AX53 V1 (main router) to my Archer C2300 (V2).
Both seem to support OpenMesh, but the connection doesn't seem to be working, not wireleslly nor ethernet backhaul.
Any way to understand why?
- Copy Link
- Report Inappropriate Content
Router_Review wrote
Kevin_Z wrote
Hello @woozle @andy1910 @Router_Review @DarkLord4563 @shawnshawn @Subhrajit_P @Vidik @Ilcasalino @kimbra @Tirik @Yolo2049 @Vetas777 @Jickson_Davis @Jeffsa12 @ModeratelyAnnoy
I've updated my thread to provide a new pre-release version, 1.4.3 Build 20250314, which includes some bug fixes and optimizations. We recommend upgrading to this version to improve the overall experience and provide your valuable feedback.
@Kevin_Z Thank you for the update.
is there any news about DoT/DoH for AX53 V1 ?
thank you :)
@Router_Review Sorry. We haven't received an advanced notice.
- Copy Link
- Report Inappropriate Content
woozle wrote
Hi,
Generally, only the routers and hardware versions listed here https://community.tp-link.com/en/home/forum/topic/697572 support EasyMesh in AP mode.
Although, the Archer AX58 V1 is somehow missing in that list. Perhaps @Kevin_Z can add it.
@woozle Thank you very much for reminding. I've updated the mentioned thread to include Archer AX58 V1.
@davidperrin1 I've responded to your inquiry in the following thread:
https://community.tp-link.com/en/home/forum/topic/697572?replyId=1530780
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6202
Replies: 64
Voters 0
No one has voted for it yet.