Official Release Archer BE900 V2 New Software Enhances System Stability
Official Release Archer BE900 V2 New Software Enhances System Stability
This Article applied to:
Archer BE900 V2 1.1.6 Build 20250317
The official version 1.1.6 Build 20250317 enhanced system stability and fixed the bug that the router might reboot itself in special cases. This update is gradually rolling out, and users can check for updates on the BE900's web interface or through the Tether App and install the latest version. We strongly recommend upgrading to this version to improve the overall experience.
New Features and Modifications for 1.1.6:
- Fixed an auto-reboot bug to improve system stability.
- Fixed a bug where MLO Wi-Fi clients' TX/RX rates sometimes displayed errors.
- Optimized the Insights function.
New Features and Modifications for previous 1.1.5:
- Newly supported DHCP-related log output in the system log.
- Fixed the bug that the router might reboot itself in special cases.
- Enhanced system stability.
Firmware Download:
If you're unable to detect the latest version at this early stage, please download the firmware from the official website and install it manually on your Archer BE900 V2.
Before the Upgrade
(1) For the sake of insurance, it's always recommended to save a copy of the router's Backup Config file before upgrading or downgrading.
(2) This official firmware for Archer BE900 V2 can be applied to all versions (EU/US/JP/AU/etc).
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
Direct Firmware Download Link
| Archer BE900_V2.0/V2.6 | Archer BE900_V2.0/V2.6_1.1.6 Build 20250317 (Official Firmware) |
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Provide a detailed network layout, including how the devices are connected, especially if there are EasyMesh satellite devices.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Update Log
Apr 10th, 2025:
Update the new 1.1.6 official firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
fbonelle wrote
Hu,
@Kevin_Z, I am running the new firmware 1.1.5 Build 20250116 rel.36390(5553) and it still randomly reboots.
Regards
@fbonelle We recommend upgrading the router firmware to the latest version, 1.1.6.
If you cannot find the 1.1.6 version in your router's web GUI or on the local website, you can manually download the firmware from other sources, such as the US website. This firmware is also compatible with the EU version.
- Copy Link
- Report Inappropriate Content
When will this firmware be available for Australia?
It's not available on the australian site and I like to keep a copy of the firmware I'm using.
I was advised the Deco firmware for Australia is the same as the US firmware when a similar situation arose for the Deco.
I was then able to download it and it for my Deco BE85, is that the case for the Archer BE900?
- Copy Link
- Report Inappropriate Content
raven-au wrote
When will this firmware be available for Australia?
It's not available on the australian site and I like to keep a copy of the firmware I'm using.
I was advised the Deco firmware for Australia is the same as the US firmware when a similar situation arose for the Deco.
I was then able to download it and it for my Deco BE85, is that the case for the Archer BE900?
@raven-au The official 1.1.6 version for BE900(AU) is in the releasing process and you should be able to detect it very soon.
If you cannot wait, you can download and install the firmware from either the global website or the US website, both are compatible with your hardware.
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
raven-au wrote
When will this firmware be available for Australia?
It's not available on the australian site and I like to keep a copy of the firmware I'm using.
I was advised the Deco firmware for Australia is the same as the US firmware when a similar situation arose for the Deco.
I was then able to download it and it for my Deco BE85, is that the case for the Archer BE900?
@raven-au The official 1.1.6 version for BE900(AU) is in the releasing process and you should be able to detect it very soon.
If you cannot wait, you can download and install the firmware from either the global website or the US website, both are compatible with your hardware.
@Kevin_Z Thanks, I'll wait a bit, my main concern is that firmware frequently becomes available for install on my devices but is not available on my local TP Link web site and I always like to ensure I have a copy of the firmware I am running, just in case I need it.
- Copy Link
- Report Inappropriate Content
No worries. The new 1.1.6 version will be published on the local website soon.
- Copy Link
- Report Inappropriate Content
Hi @Kevin_Z,
I have updated to version 1.1.6 one week ago and it's now stable: there was no reboot during this week and the wifi didn't crash (I have an easymesh setup with BE900 as main router and two RE900XD as access points).
Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 886
Replies: 17
Voters 1