Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > TP-Link Deco X50-5G has very low speed

< Deco

TP-Link Deco X50-5G has very low speed

Goksun

2024-11-23 11:25:02 - last edited 2 weeks ago

Posts: 4

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2023-01-30

TP-Link Deco X50-5G has very low speed

2024-11-23 11:25:02 - last edited 2 weeks ago

Tags: #Network Connectivity #Installation

Model: Deco X50-5G

Hardware Version:

Firmware Version:

I have Deco-P9 mesh wifi at home with ZTE MC801A 5G modem. In order to use the modem from same family, I decide to replace with Deco X50-5G. However, speed it very bad. I can get 300 bps with ZTE but same SIM card Deco X50-5G gives only 25 to 30 bps. I don't understand what is wrong? Both modems are connected in same place, same SIM card. Even when I see user interface of Deco X50-5G, signal of mobile network is 100%. Is there any settings that I am missing?

1 Accepted Solution

David-TP

2024-11-25 11:54:22 - last edited 2 weeks ago

Posts: 12823

Helpful: 1802

Solutions: 1297

Stories: 9

Registered: 2020-04-14

Re:TP-Link Deco X50-5G has very low speed-Solution

2024-11-25 11:54:22 - last edited 2 weeks ago

@Goksun

Hi, Thank you very much for the feedback.

May I know you SIM service provider?

Please make sure the OQS on the Deco X50-5G disabled, or set to 350Mbps upload/download.

It is also suggested to temporatily disable 2.4Ghz band and test the interent speed on the 5Ghz wifi only.

Moreover, Have you checked the current network mode as well as the 5G NR/LTE band on the Deco X50-5G? Is it the same as what was on ZTE MC801A 5G modem?

If you haven't updated to 1.2.0 here, It is also suggested to manually install the latest firmware here:

Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

1 Reply

David-TP

2024-11-25 11:54:22 - last edited 2 weeks ago

Posts: 12823

Helpful: 1802

Solutions: 1297

Stories: 9

Registered: 2020-04-14

Re:TP-Link Deco X50-5G has very low speed-Solution

2024-11-25 11:54:22 - last edited 2 weeks ago

@Goksun

Hi, Thank you very much for the feedback.

May I know you SIM service provider?

Please make sure the OQS on the Deco X50-5G disabled, or set to 350Mbps upload/download.

It is also suggested to temporatily disable 2.4Ghz band and test the interent speed on the 5Ghz wifi only.

Moreover, Have you checked the current network mode as well as the 5G NR/LTE band on the Deco X50-5G? Is it the same as what was on ZTE MC801A 5G modem?

If you haven't updated to 1.2.0 here, It is also suggested to manually install the latest firmware here:

Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

TP-Link Deco X50-5G has very low speed

TP-Link Deco X50-5G has very low speed

Information

Voters 1

Tags