TP-link Router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-link Router
Tags:
#Network Connectivity
The TP-link Router TL-WR940N that I bought does not have SNMP for my ISP to monitor the status of our Internet link. What can I do in order for our ISP to monitor our Internet link.
2 Accepted Solutions
Re:TP-link Router-Solution
Your ISP can monitor your Internet connection by pinging TL-WR940N WAN IP address for example:
Just make sure that this setting is not enabled:
If your internet connection is down (there's no IP address on the WAN port), the echo request would not receive an echo response.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Re:TP-link Router-Solution
Your ISP can monitor your Internet connection by pinging TL-WR940N WAN IP address for example:
Just make sure that this setting is not enabled:
If your internet connection is down (there's no IP address on the WAN port), the echo request would not receive an echo response.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".