Powerline Adapters

The Powerline Adapters are mainly designed to extend your network to any room via existing power line. They are quite easy to setup while the transmission is stable and fast. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Powerline Adapters.
Powerline Adapters

Tags

Label

 
Update: Official firmware of PGW2440 has already support EasyMesh, you could download official firmware from our official website: Download for PGW2440 KIT Hello everyone, We are currently working on
OfficialHighlighted ThreadEasyMesh
By Sunshine · Latest post 2024-11-18 17:46:34 by myolsd
2Helpful
1944Views
9Replies
This Article Applies to: TL-WPA7510, TL-WPA9610, TL-WPA8730/8630(P) V2, WPA4220 V3, etc. Problem Description/ Phenomenon: What is Smart DHCP, and How does Smart DHCP work? Visit TP-Link Smart DHCP Mak
Highlighted ThreadOfficial
By Solla-topee · Latest post 2023-05-26 19:51:04 by Nor7on
112Helpful
51247Views
200Replies
Hi Folks, I have an Archer AX73 v2.0 (Firmware Version: 1.1.0 Build 20240323 rel.70541(4555) ) connected to a TL-WPA8631P Powerline Adapter (Hardware and Firmware versions attached to thread.) in a me
EasyMesh
By JDonald125 · Latest post Yesterday by zexoni70
1Helpful
305Views
4Replies
Hello, We got two buildings, one house and one garage. The power line in to this lot is splited. One splits of to the house with its own "fuse box" and one splits of to the garage with its own "fuse b
By Sreener · Latest post Friday by terziyski
0Helpful
34Views
1Replies
I recently changed my network in my house in that now have a new router and switch. I then reset the tplink and connected to its WiFi. The tether app can find the device no problem but when I click it
By jertster · Latest post Friday by Joseph-TP
0Helpful
40Views
1Replies
I have several power line wifi extenders. I have a AV600 which I have connected to the internet and it works fine. I need to extend the signal to my conservatory. This is on the same electric circuit
Network Connectivity
By AnniFenty · Latest post Thursday by Joseph-TP
0Helpful
47Views
1Replies
I have a Powerline 8630 kit I purchased a few years back. All working well. I'd like to add another Powerline extender. I get the impression the 8630 models have been discontinued. Is there any model
By Fleetman · Latest post Wednesday by Joseph-TP
0Helpful
33Views
1Replies
Is there anything that I need to do to setup these adaptor to allow tagged vlan traffic. Yes there are post that says this should work, its a layer 2 device so should work but there is another post fr
Network ConnectivityEthernet over power
By Paped · Latest post Tuesday by Joseph-TP
0Helpful
120Views
3Replies
I have the above kit which has been working well but I have recently had to unplug it due to installation of new broadband. I have not been able to get the transmitter unit to turn on once I plugged i
By GYBlue · Latest post Tuesday by Joseph-TP
0Helpful
59Views
1Replies
Hi. I have a powerline kit TL-PA4010P V5. The current version of the firmware is 1.4.0.20. I checked the official TP-Link page and I see that there is a firmware update, specifically v.2.0.2. I downlo
By madvinegar · Latest post Monday by madvinegar
0Helpful
81Views
2Replies
123...
123...