Generally, if you want give different departments serval IP address range, you will need more than one subnet. But unfuntunally, this router cannot more than one DHCP Server. So it can not supply...

Hello DanhTran2409 wrote I configured VLAN and PVID for switch TPLink TL1600G-18TS with detail as: Port 1: tag vlan 10 and 20 ( connect to port trunk on switch cisco 3560) Port 3 - 8: tag vlan 10 and...

Hi Ciprian I used open the port 80 for my webserver in the LAN. It can work fine. Maybe different firmware verison? I use the TL-ER6020(UN)_V2_20180702.

HI Shawn How did you test it? Is there another NAT device before this router? It seems your setting is right.

Hi, there, what's the model name of your TP-Link router?

TP-Link wrote Dear R1D2 Thank you for the suggestions. We will check all the requests you have mentioned and try to improve it. Best Regards. ----------------------------- TP-Link Good Job! But when...