Rngtone Not Sync between hub and doorbell

Rngtone Not Sync between hub and doorbell

Rngtone Not Sync between hub and doorbell
Rngtone Not Sync between hub and doorbell
2023-12-15 02:35:18 - last edited 2023-12-28 10:00:45
Model: Tapo D230S1  
Hardware Version: V1
Firmware Version: 1.1.12 Build 20230809 rel 73260

Hi,

I have changed the ringtone in hub setting page. However when I press the doorbell, the default ringtone is still sent to the hub. The customised ringtone isn't synchronise or registered by the doorbell.

 

Tried reaetting or rebooting the hub and doorbelll. It still not pick up the customised ringtone.

 

Could you advise how to fix this? 

 

Thanks.

  0      
  0      
#1
Options
2 Accepted Solutions
Re:Rngtone Not Sync between hub and doorbell-Solution
2023-12-18 12:01:37 - last edited 2023-12-28 10:00:45

  @Kit574 

Hi,
To change the Ringtone of the hub when pressing the doorbell, on the camera's Device Settings>doorbell>Ring Connected Hub>Hub Sound Settings, you can change the Volume and Ringtone.
Best Regards

Recommended Solution
  0  
  0  
#2
Options
Re:Rngtone Not Sync between hub and doorbell-Solution
2024-07-16 14:14:33 - last edited 2024-07-17 10:42:53

Hi all,

just to let everyone know that the issue with the hub D200 ring tone has now been resolved, the new firmware update has been downloaded to my hub and working hallelujah 👍

Recommended Solution
  2  
  2  
#6
Options
5 Reply
Re:Rngtone Not Sync between hub and doorbell-Solution
2023-12-18 12:01:37 - last edited 2023-12-28 10:00:45

  @Kit574 

Hi,
To change the Ringtone of the hub when pressing the doorbell, on the camera's Device Settings>doorbell>Ring Connected Hub>Hub Sound Settings, you can change the Volume and Ringtone.
Best Regards

Recommended Solution
  0  
  0  
#2
Options
Re:Rngtone Not Sync between hub and doorbell
2024-01-18 04:36:39

  @Kit574 Hello, have you tried re-confirming your custom ringtone settings to make sure it has been saved and activated? If the problem continues, it is best to contact technical support directly to receive accurate and fast assistance.

  0  
  0  
#3
Options
Re:Rngtone Not Sync between hub and doorbell
2024-07-12 20:37:35

 I too have the same problem, I'm not able to get my H200 hub to ring the selected ring, it keeps ringing the ring selected for the doorbell 

I'm disappointed.

  0  
  0  
#4
Options
Re:Rngtone Not Sync between hub and doorbell
2024-07-15 07:55:14

  @Calypso-53 

Hi,
If you want to change the ringtone of the H200 when someone presses the doorbell, please refer to the instructions here
Best Regards

  0  
  0  
#5
Options
Re:Rngtone Not Sync between hub and doorbell-Solution
2024-07-16 14:14:33 - last edited 2024-07-17 10:42:53

Hi all,

just to let everyone know that the issue with the hub D200 ring tone has now been resolved, the new firmware update has been downloaded to my hub and working hallelujah 👍

Recommended Solution
  2  
  2  
#6
Options

Information

Helpful: 0

Views: 792

Replies: 5

Related Articles