dhcp disabled
Please help i accidentally disabled my dhcp in my router with remote manager turn on and change its subnet mask using my pc ip address and now i cant access the tp link routers web page, i already reset it using the reset button but still i can/t access its web page please help me thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @lionel13,
If other browsers can log in to the router's web page normally, it is likely that Chrome has set restrictions on the access address.
It is recommended that you check Chrome's settings, such as security settings, parental control settings, etc.
- Copy Link
- Report Inappropriate Content
Hi@lionel1,
Please check if you reset the router correctly: Pressing this button for more than 5 seconds enables the Reset function. With the router powered on, press and hold the WPS/RESET button (approximately 8 seconds) until the system LED becomes quick-flash from slow-flash. And then release the button and wait the router to reboot to its factory default settings.
To access the configuration utility, open a web-browser and type the default address http://tplinkwifi.net in the address field of the browser.
- Copy Link
- Report Inappropriate Content
@Joseph-TP i think i reset it correctly because the wifi ssid name is change now to default name and the password too is now open so i can connect to it but the problem is even though i connect to its wifi or via ethernet i can't still access the default page which is 192.168.0.1
Joseph-TP wrote
Hi@lionel1,
Please check if you reset the router correctly: Pressing this button for more than 5 seconds enables the Reset function. With the router powered on, press and hold the WPS/RESET button (approximately 8 seconds) until the system LED becomes quick-flash from slow-flash. And then release the button and wait the router to reboot to its factory default settings.
To access the configuration utility, open a web-browser and type the default address http://tplinkwifi.net in the address field of the browser.
- Copy Link
- Report Inappropriate Content
lionel13 wrote
@Joseph-TP i think i reset it correctly because the wifi ssid name is change now to default name and the password too is now open so i can connect to it but the problem is even though i connect to its wifi or via ethernet i can't still access the default page which is 192.168.0.1
Joseph-TP wrote
Hi@lionel1,
Please check if you reset the router correctly: Pressing this button for more than 5 seconds enables the Reset function. With the router powered on, press and hold the WPS/RESET button (approximately 8 seconds) until the system LED becomes quick-flash from slow-flash. And then release the button and wait the router to reboot to its factory default settings.
To access the configuration utility, open a web-browser and type the default address http://tplinkwifi.net in the address field of the browser.
i can access now the gui using other browser but using chrome is still not working i don't know why
- Copy Link
- Report Inappropriate Content
Hi @lionel13,
If other browsers can log in to the router's web page normally, it is likely that Chrome has set restrictions on the access address.
It is recommended that you check Chrome's settings, such as security settings, parental control settings, etc.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 168
Replies: 4
Voters 0
No one has voted for it yet.