Home Network Community > Range Extenders > TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)
< Range Extenders

TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)

TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)

TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)
TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)
3 weeks ago - last edited 3 weeks ago
Tags: #EasyMesh
Model: RE305   Archer NX200  
Hardware Version: V4
Firmware Version: 1.0.23 Build 230418 Rel.60395n (6985/8575)

Hello , 
 

TP-Link Archer NX200 I don't see the RE305 as RE or part of Mesh , i see it as normal wifi client . 

 

TP-Link Archer NX200

Firmware Version:1.0.0 3.0.0 v60a2.0 Build 240309 Rel.4758n

Hardware Version:Archer NX200 v1.0 00000000

wifi secuirty mode WPA2-PSK[AES]+WPA3-Personal


in the router EasyMesh is enabled however it says that WP3-Personal and WPA2-Enterprise are unavailable !

 

RE305:

tplink view
 

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)-Solution
3 weeks ago - last edited 3 weeks ago

  @Amer-Hash 

 

Hi,

 

In case you have "Band Steering" activated in the Wireless Settings menu of the NX200 switch it off and then try again if the RE305 can connect as EasyMesh device.

 

Edit: If the above by itself doesn't help also try to connect the two devices using the WPS method. (i.e. first press the WPS button of the NX200 and right after that press the WPS button of the RE305)

Recommended Solution
  2  
  2  
#2
Options
3 Reply
Re:TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)-Solution
3 weeks ago - last edited 3 weeks ago

  @Amer-Hash 

 

Hi,

 

In case you have "Band Steering" activated in the Wireless Settings menu of the NX200 switch it off and then try again if the RE305 can connect as EasyMesh device.

 

Edit: If the above by itself doesn't help also try to connect the two devices using the WPS method. (i.e. first press the WPS button of the NX200 and right after that press the WPS button of the RE305)

Recommended Solution
  2  
  2  
#2
Options
Re:TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)
3 weeks ago

Hi  @Amer-Hash 

As woozle said, you can try WPS buttons to create easymesh network between NX200 and RE305.

It is recommended that you can factory reset the RE305 before you set up easymesh network:

Keep power on, Use a pin to press the reset button(hole) for 1 second to reset the extender

  0  
  0  
#3
Options
Re:TP-Link 5G router ArcherNX200 has no easyMesh integration with TP-Link RE305 (WPA3)
3 weeks ago

  @Amer-Hash 

 

Thanks indeed using WPS button fixed the integration between RE305 and ArcherNX200

 

  1  
  1  
#4
Options

Information

Helpful: 1

Views: 216

Replies: 3

Tags

EasyMesh
Related Articles
Does tp-link have a 5G modem/router?
623 0
TP Link EasyMesh with Mercusys EasyMesh
5016 0
RE705X using with EasyMesh Router not working
243 0
 5G router from TP-Link?
1948 1
Using OneMesh or EasyMesh without TP-Link router
836 0
TP-Link EasyMesh Wireless Backhaul between Routers and Range Extenders
14949 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.