Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?

Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?

Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Wednesday - last edited Saturday
Tags: #Firmware Update #FirmwareUpdateC64
Model: Archer C64  
Hardware Version: V1
Firmware Version: 1.12.10 Build 230208 Rel.38878n(5553)

Hello everyone,

I recently noticed that a new firmware update (Version 1.13.15 Build 240812 Rel.53634n) is available for my TP-Link Archer C64 router. My current firmware version is 1.12.10 Build 230208 Rel.38878n.

 

The release notes mention improved device stability and several bug fixes, including issues with:

  • Client upload/download speed display on the Network Map
  • Port forwarding failure with RTSP streams
  • Device name display in AP mode when DHCP is disabled
  • Device reboot on receiving specific packets in certain environments

 

Before I proceed with the update, I'd like to ask if anyone here has already installed it and experienced any issues, particularly with range coverage, connection stability, or any other unforeseen bugs. I rely heavily on stable and extended Wi-Fi coverage, so any feedback on range changes would be especially helpful.

Thank you for your input!

 

Best regards,
Zubaer

 

 

  2      
  2      
#1
Options
1 Accepted Solution
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?-Solution
Friday - last edited Saturday

  @ZubaerAhmad-XI 

 

TBH, I didn't know what the signal strength was before FW update to compare it now, but I didn't notice any problems in my particular setup with the wireless coverage..

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
6 Reply
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Wednesday

  @ZubaerAhmad-XI 

 

I'm using this FW version and so far haven't noticed any issues related to it.

This FW version fixed the bug that guest SSID in AP mode wasn't working - details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Friday - last edited Friday

 

Hi! @terziyski 

Thanks for the quick response and for confirming that there aren’t any known issues with the update. That’s reassuring!
 

I wanted to ask a bit more specifically about the wireless range. After applying the new firmware update, have you or anyone else noticed any change in range coverage on either the 2.4 GHz or 5 GHz bands? I’m particularly concerned about any decrease in range that might affect coverage in larger areas of my home.

 

Thanks again for the help!

Best regards,
Zubaer

  0  
  0  
#3
Options
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?-Solution
Friday - last edited Saturday

  @ZubaerAhmad-XI 

 

TBH, I didn't know what the signal strength was before FW update to compare it now, but I didn't notice any problems in my particular setup with the wireless coverage..

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#4
Options
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Yesterday - last edited Yesterday

A have Smartconnect problem. On 1.13.15 and on beta 1.14.3:

 

once android\phone device connected to 5Ghz, then move to low signal zone, connect switched to 2.4Ghz and keep slow 2.4ghz link all the time, even standing straight ahead the router it WONT switch back to 5Ghz. 

 

  1  
  1  
#5
Options
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Yesterday

 Hello @YuriyB,  
Does this issue occur only when the Archer C64 is used as a repeater? After the update, I haven't encountered any problems so far.

  0  
  0  
#6
Options
Re:Query About Firmware Update 1.13.15 for Archer C64 - Any Known Issues?
Yesterday - last edited Yesterday

  @ZubaerAhmad-XI 

in any mode. sdandalone, repeater, easymesh

 

Did you enabled smartconnect?

pleasy try move to weak signal zone so your device will switch from 5 to 2.4ghz.

and then go back to check whether it will switch back to 5ghz or will keep slow 2.4ghz

  0  
  0  
#7
Options