Official Release EasyMesh Range Extenders Start Supporting Building a EasyMesh Network via Ethernet Backhaul
This Article Applied to:
| RE315_V1 | RE315_V1_1.0.30 Build 230919 |
| RE900XD_V1 | RE900XD_V1_Build_20240411 |
| RE800BE_V1 | Planned |
What is EasyMesh with Ethernet Backhaul and Why we need it?
EasyMesh with Ethernet Backhaul refers to the Main router and the satellite device are connected via an Ethernet cable to establish an EasyMesh network. Ethernet Backhaul offers a more reliable and faster option compared to EasyMesh with Wi-Fi, ensuring a robust and efficient EasyMesh network setup.
How to create EasyMesh with Ethernet Backahul?
Pre-configuration Notice:
1.Ethernet Backhaul is supported only when both your main router and satellite extender support EasyMesh with Ethernet Backhaul.
>>Router Support List of EasyMesh with Ethernet Backhaul
2.The extender needs to be under wireles range extender mode, not Access Point.
3.Once the Ethernet backhaul is successfully established, the wireless backhaul will be automatically disconnected. Conversely, if the Ethernet backhaul connection gets interrupted, the devices will automatically reestablish the mesh network using the wireless backhaul.
Scenario 1: Change wireless backhaul to Ethernet backhaul
Scenario 2: Add a new satellite Range Extender to EasyMesh
EasyMesh with Ethernet Backhaul stars with RE315_V1, which features an Ethernet Port with a speed of up to 100 m/s. This functionality will gradually be extended to other EasyMesh-supported extenders. We encourage you to share your feedback below regarding your current models of EasyMesh extenders and routers. This feedback will help us prioritize the implementation of EasyMesh on different product models.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Host router is Archer AX73 v2, in non ethernet backhaul mode everything works fine, only when connected to ethernet NTP servers cannot be reached.
I will add pictures later, I don't have access to the devices right now
- Copy Link
- Report Inappropriate Content
RE315 V1 NTP
RE315 V1 DNS
Archer AX73 V2 DHCP
Archer AX73 V2 NTP
Firmware
- Copy Link
- Report Inappropriate Content
Archer AX73 V2 DHCP address reservation
- Copy Link
- Report Inappropriate Content
Could you please consider adding ethernet backhaul to RE700X wifi 6 range extender? I am using RE700X units (3) with my main router which is a TP Link BE900.
Thanks!
- Copy Link
- Report Inappropriate Content
Thank you very much for the pictures.
The case has been forwarded to the engineers for further assistance.
Please check the email for more suggestions.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@David-TP Hi. I have a new C80 V2.2 router with the latest firmware. What should I buy as an ethernet connected WiFi extender please? Another C80 or a WiFi extender like the RE315 ? What other extenders are compatible eg RE330 ?
Thanks. Alan in France.
- Copy Link
- Report Inappropriate Content
It would be a good idea if there's a thread listing the ethernet backhaul capable REs (when there's more than one) like for the wireless routers.
- Copy Link
- Report Inappropriate Content
@terziyski Yes, I do agree with you. However, RE315 is the only model that supports EasyMesh over Ethernet Backhaul.
RE800BE might be the next, but so far this model hasn't been officially released.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 16021
Replies: 60
Voters 3
