Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Sometimes, even when set, it does not respect the device preferred deco settings.
I just have to turn off my device wifi and wait a few seconds before turn on, and see if it connects to preferred deco.
- Copy Link
- Report Inappropriate Content
Do all source deco have to be on 1.6 also? Mine displays an error when attempting to save.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Sorry, it was the source but seems I can't do that due to all devices are required to be 1.6
is there an official release date yet?
- Copy Link
- Report Inappropriate Content
@mrlee2 In my installation, Deco source selection does not apply If ethernet is used as backhaul, only to wifi connected Decos.
- Copy Link
- Report Inappropriate Content
@TP-Link I have 3 Deco M5 units set up as access points to my home network. The main deco is wired and the remaining two are connected via wireless. Everything works fine for abut a week and then I notice a device (usually a phone) cannot connect to the wifi even when in the same room as the router. a reboot of the router and the main deco cures this for another week. I have also noticed when this happens, no devices are connected directly to the router wifi even when in the same room as the router.
I thought this may be due to the Deco affecting the IP allocation as described as fixed in the beta version 1.6.
I downloaded and installed the version but I found could not access any of the new settings described in the new new version. In fact when I selected "System parameters" on the main deco (or any Deco), the result was an endlessly rotating circle and I could only exit the screen using the back arrow.
I have performed a factory reset on all units and the system works as previously described above. I still cannot access the system parameters settings.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, could you please record a video clip about not being able to access the system parameters settings?
May I know the model number of your home router?
What are the model number and operating system of the smartphone?
Have you tried to turn off the Wi-Fi of the main router and let Deco take over all the wireless networks?
Thank you very much.
- Copy Link
- Report Inappropriate Content
I have updated my Deco M5(3.0) in all 3 units. For the last 3 weeks, I'm facing connecting issues for several devices. My Sony smart TV loses connection several times a day. I also face speed delays in my PC and mobile phones. When I switch to a WiFi network generated by the ISP router they work fine. I have disabled Deco antivirus and other inspection features and I face the issue not as often, but it still happens.
I was using the beta 1.5 firmware and it was working perfectly. Unfortunately I cannot install it back.
Is there any new/official release planned to be launched?
Thank you!
- Copy Link
- Report Inappropriate Content
@TP-Link Just a small cosmetic remark: the icon for "Reboot Schedule for every day/week under Deco App > More > Reboot Schedule" has a slightly different color than all the other buttons.
Update works great, happy to be able to select the satellite signal source now. Had issues with that before the update and connection is solved because of this update.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238056
Replies: 873
Voters 5
