Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Hello, I am having the same issue. I can assign the pucks the way I want (I have 6 Deco M5's), but when I try to assign devices, they show up in the preferred list correctly but actually connected to a farther away puck. For me this is happening to my Sonos devices and TCL TV's. I even tried assigning them while they were offline, then rebooting, but no luck. Any help would be appreciated!
- Copy Link
- Report Inappropriate Content
Hi, since now the signal source of the bedroom has changed to the hallway Deco, how about the backhaul connection on the bedroom, still 2.4ghz only or 2.4ghz and 5ghz now?
I have not seen any information about this in the attached pictures.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi, could you please help me check the following information:
1. Can I have some pictures that the connection preference is one Deco while the actual linked Deco is another?
2. Would powering off the Deco system make any difference?
--if not, please re-select the connection preference and wait for about 1-2mints, then please go to Deco APP>Overview>three lines on the top>help >contact US>suggestions and send me the APP log.
By the way, May I know the model number of your Sonos devices and TCL smart TV？
- Copy Link
- Report Inappropriate Content
Hi, yes, the signal is still 2.4Ghz even when connected to the hallway. Please find attached the screenshot of this.
- Copy Link
- Report Inappropriate Content
@TP-Link When are these features coming to X60?
- Copy Link
- Report Inappropriate Content
and also when it will comes to M9 Plus?
- Copy Link
- Report Inappropriate Content
@TP-Link I installed this version this morning, so far it's great. I would like to know if deco looks for the best channel to be used in both frequencies automatically. You could allow the user to choose the frequency to be used. Another thing, so far, we've only been able to view the channel we're using by accessing the web
- Copy Link
- Report Inappropriate Content
@TP-Link M5(3.2) mine is unable to upgrade using this firmware
- Copy Link
- Report Inappropriate Content
#42
https://community.tp-link.com/en/home/forum/topic/274402?replyId=633386
The firmware for V3.2 is still under testing now.
- Copy Link
- Report Inappropriate Content
@TP-Link any dates?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238138
Replies: 873
Voters 5
