New Release Onemesh Firmware for Archer AX10
Hello everyone,
The Onemesh firmware for Archer AX10 is now available, customers who own the router can update the firmware to enjoy the mesh network with the range extender/powerline extender.
Customers can check for the new firmware on the router web GUI or via the Tether app, they can also download the firmware from the TP-Link official website to upgrade the router manually.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Release note for the firmware:
New Features/Enhancement:
1. Added OneMesh feature;
2. Updated IPTV Profile;
3. Added System Time feature on Tether App;
4. Added QoS Schedule feature;
5. Added a prompt when the negotiation rate of the WAN port is 100Mbps;
6. Optimized the Parental Control feature;
7. Added dual NAT detection and Internet Online time feature on Tether App;
8. Maximum number of clients on the single-band network increased to 128;
9. Added IPTV feature on Tether App;
10. Optimized the Client List;
11. The wireless default encryption method is modified to WPA2+AES.
Bug Fixed:
1. Fixed the FragAttacks vulnerabilities;
2. Fixed the bug that the router incorrectly blocked Internet requests;
3. Fixed the potential shell illegal injection risk of the read and write instructions of the tddp module;
4. Fixed the display error on Network Map page in some cases;
5. Fixed the bug that TKIP encryption was not supported under 11ax only mode;
6. Fixed the bug that Web UI cannot synchronize the operation of deleting UPNP entries;
7. Fixed the bug that the PPTP VPN server feature can't be enabled and the account can't be deleted in some cases;
8. Fixed the bug that the router failed to save system log in AP mode;
9. Fixed the bug that AX10-TDDP causes RCE vulnerabilities;
10. Fixed uhttpd Directory Traversal vulnerabilities;
11. Fixed the bug that Tether app failed to show the IP address in some cases;
12. Fixed the bug that the client type cannot be changed on the Tether App;
13. Fixed the bug that client icon can't be set to other on Tether App.
Do let the community know if there is an issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Yes, you will also get the Onemesh firmware for the EU v1.20, please check it later on the router web or on the local website later, thanks
- Copy Link
- Report Inappropriate Content
Do you mean after the factory reset, internet works, but it will stop if you disable the Smart Connect on the router? Did you change any other settings on the router? Generally, the Smart Connect feature won't affect the internet access. What if you connect a computer to the AX10 with Ethernet cable, will you have the internet access when the Smart Connect is off?
cayc wrote
Hello.
When I turned off smart connect, internet is not working.
Reset helped for 5 minutes.
Can you help me?
After update I must have turned on smart connect, but I want it separate, because when I am on 5ghz I have 600/800Mbps wifi, when I have smart connect on, and I am about 5 meters from router my Phone Galaxy s20+ shows speed 20/20Mbps and it Works on 2,4ghz.
- Copy Link
- Report Inappropriate Content
Yes router Works only if smartconnect is enabled.
When I turn it off and have separate 2,4 and 5ghz wifi then internet is not working.
I am using wifi, I dont have lan port on my notebook.
- Copy Link
- Report Inappropriate Content
When the Smart Connect is off, are you able to connect to the 2.4G or 5G network? Please check if you can still get a valid IP address from the router, try to do a ping test if the devices can still connect to the network and obtain IP address.
How to do a ping test? Please check this: https://www.tp-link.com/support/faq/425/.
BTW, what if you disable the Onemesh feature on the AX10 as well?
- Copy Link
- Report Inappropriate Content
Hello.
Onemesh doesnt do anything.
When smartconnect is on internet is slow and works for about 2 hours, then internet stop working.
When smartconnect is off internet works 5 minutes.
I must buy another router....
Bad updates...
I have sold my Archer c6 because of updates and now I must sell this AX10...
- Copy Link
- Report Inappropriate Content
Sorry to know the firmware update caused issues to the connection. We would like to escalate the case to the support engineers, they will help analyze the issue and fix it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello.
For me helped RESET button on the back of router, factory reset from web did not helped.
But after 24 hours router LED of internet was ORANGE, my phone says connected but no internet access.
So problem persist...
I will try to power router from wall, not from surge protector and will inform you.
- Copy Link
- Report Inappropriate Content
I am happy now, I have successfully downgraded fw.
For now it works brilliant with march fw.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 23815
Replies: 113
Voters 0
No one has voted for it yet.