Archer C9 Brick
Archer C9 Brick
Model : Archer C9
Hardware Version : V1
Firmware Version : Archer C9_V1_151125
ISP :
So I've got a C9 that was working fine till being unplugged from mains power. Now it shows all LEDs illuminated for about 55 seconds and then all LEDs off for about 1:30 then all on again. No wireless signal. I get a connection with an Ethernet cable but no IP address is given out. Already tried the reset button but no change.
Tried C9 TFTPD recovery mode (hold reset for 5 seconds after power on)with Ethernet lead and IP address 192.168.1.66 and 192.168.0.66 but get no output from the C9. I'm next to try the Serial TTL TFTPD recovery just waiting on the adapter.
Till then has anyone else ever experienced my C9s symptoms and were you able to recover, if so what was you solution?
Hopefully it's not a perma brick.
Hardware Version : V1
Firmware Version : Archer C9_V1_151125
ISP :
So I've got a C9 that was working fine till being unplugged from mains power. Now it shows all LEDs illuminated for about 55 seconds and then all LEDs off for about 1:30 then all on again. No wireless signal. I get a connection with an Ethernet cable but no IP address is given out. Already tried the reset button but no change.
Tried C9 TFTPD recovery mode (hold reset for 5 seconds after power on)with Ethernet lead and IP address 192.168.1.66 and 192.168.0.66 but get no output from the C9. I'm next to try the Serial TTL TFTPD recovery just waiting on the adapter.
Till then has anyone else ever experienced my C9s symptoms and were you able to recover, if so what was you solution?
Hopefully it's not a perma brick.