Powerline Adapters
The Powerline Adapters are mainly designed to extend your network to any room via existing power line. They are quite easy to setup while the transmission is stable and fast. In this section you can say hello to other members, ask, answer or discuss technical topics regarding Powerline Adapters.
Powerline Adapters
Update: Official firmware of PGW2440 has already support EasyMesh, you could download official firmware from our official website: Download for PGW2440 KIT Hello everyone, We are currently working on
OfficialHighlighted ThreadEasyMesh
2Helpful
1959Views
This Article Applies to: TL-WPA7510, TL-WPA9610, TL-WPA8730/8630(P) V2, WPA4220 V3, etc. Problem Description/ Phenomenon: What is Smart DHCP, and How does Smart DHCP work? Visit TP-Link Smart DHCP Mak
Highlighted ThreadOfficial
112Helpful
51443Views
I just bought the av600 powerline extender, and all lights in both devices are green, but for some reason when I connect to the wifi it says, "Connected, no internet" and the ethernet also doesn't wor
Network Connectivity
By
PedroLS
0Helpful
13Views
I use TL-PA717 kit to get Ethernet to my main PC. A few weeks ago the middle light started turning off after using the computer for a while. I thought it could be from my pc, but after doing all the t
Network Connectivity
0Helpful
77Views
I have recently purchased these powerline adapters and all worked well for about 7 days now the remote ones keeps losing all 3 lights. If I take it downstairs and reset it it is ok for about 30 minute
0Helpful
31Views
Is there anything that I need to do to setup these adaptor to allow tagged vlan traffic. Yes there are post that says this should work, its a layer 2 device so should work but there is another post fr
Network ConnectivityEthernet over power
0Helpful
142Views
Hi Folks, I have an Archer AX73 v2.0 (Firmware Version: 1.1.0 Build 20240323 rel.70541(4555) ) connected to a TL-WPA8631P Powerline Adapter (Hardware and Firmware versions attached to thread.) in a me
EasyMesh
By
JDonald125
· Latest post Saturday
by zexoni70
1Helpful
317Views
Hello, We got two buildings, one house and one garage. The power line in to this lot is splited. One splits of to the house with its own "fuse box" and one splits of to the garage with its own "fuse b
0Helpful
57Views
I recently changed my network in my house in that now have a new router and switch. I then reset the tplink and connected to its WiFi. The tether app can find the device no problem but when I click it
0Helpful
52Views
I have several power line wifi extenders. I have a AV600 which I have connected to the internet and it works fine. I need to extend the signal to my conservatory. This is on the same electric circuit
Network Connectivity
0Helpful
66Views