Settings > Transmission > Nat > Port Entered two entries From WAN Port 85 to 192.168.30.250 to port 85 - TCP only From WAN Port 2085 to 192.168.30.250 to port 2085 - TCP only Everything worked fine, b

I have an all Omada config. 3 x sg2008p 1 x er605 1 x eap610 I have 6 vlans 1 = admin 10 = office 20 = media 30 = servers 40 = IOT 50 = Wifi I want to set up VLAN 40 as follows VLAN 40 should not be a

Went to upgrade and ran into issues. 5.0.30 to 5.1.17 Probably my fault. I have a site backup. I also have backups to the cloud from the 5.0.30 What I have ended up with is a fresh install on 5.1.17 -

I still cannot get DHCP reservation working reliably. Per the screenshot below you can see I have an IP address reservation of 192.168.50.10 (outside my DHCP range which start is 192.168.50.75 - 192.1

How to set up Omada to work with your own DHCP/DNS servers. https://www.scribd.com/document/558480187/Enable-External-DHCP-on-Omada

There are 2 DHCP settibngs options on Wired Networks --> LAN --> Networks tab (setting up VLANs) One is called DHCP server and is as you would expect... DHCP range, DNS, Default gatewatr, Domain, - I