After 5 hours of trying to make the ER706 and OC200 to work I removed them from my system and installed the old router. TP-LINK your quality control is a joke.... I configured the ER by using the web

It would be nice if the external IP-Address on the WAN interfaces are shown in the Omada interface. Currently it shows nothing, other than 'Dynamic IP': OC200 is running 4.3.5 - Firmware 1.8.0 Build 2

I'm confused here. I thought the ER605 was an edge-router. I just replace my Ubiquiti ER-X with this and it has <10% the capability. I got it adopted, reset my LAN to my preferred 10.50.1.1/24, coded

The TL-R605, which is being managed by my Omada software controller, is serving up a config page on port 80. Not only is this a huge security flaw, but it's likely interfering with authentication for

Hello, i plugged a eap225 outdoor the poe+ slot of the eap225 wall, but the outdoor ap does not get power. Using the power oep adapter which comes with the eap225 outdoor and connect it to the normal

Hey, I've got what should be an easy issue to resolve. I have a tl-r605 that is attached to an OC200. I'm current working on building out the security on this router and found that the management port