@xleroc Given the frequency of those failures and the rapidity with which the channels are changing, it seems like you still have band steering on and and bound the SSID to both radios. I would turn...

@xleroc Ooops, sorry. I just saw the full image you uploaded. Obviously you tried different channels and radios (2.4 & 5.8). WPA settings would be the next place I would try. I would also your...

Hi @xleroc, Interesting. Did it used to stay connected and recently stopped connecting reliably, or has it never worked? From your error message, I have few additional questions / suggestions: 1)...

Hi @Ser, If you are buying new EAP's, definitely buy the V3 hardware revisions for the EAP225 & EAP245 indoor, ceiling/wall mount AP's. Note that there are also some newer 225-series products like...

Welcome @groovines, Are you running the Omada SW? Or do you have an OC-200? As Fae said, you'll need to use the new/current version of the Omada/SDN software to be compatible with the updated...

Hi @xleroc, Some things to try (not sure of your current config): 1) Set the AP's to use different radio channels for all radios. 1, 6, or 11 for the 2.4GHz and 36 and 149 for the 5.8GHz 2) Lower the...