@Hank21 Is it possible to adopt the switch from one controller and than migrate it over to another controller. Ex: I can run the windows version of the controller on my laptop. Adopt it and configure...

@Hank21 In the guide iin both section of the guide, 4. Reconnect the controller to switch A through port 4 (the idle port configured in step 2). 5. Reconnect the controller to switch A through port 4...

@Hank21 I have ER8411 as a gateway BUT, I am NOT using it as the inter-vlan. I have a 100Gb L3 switch as my core/ToR switch. The SX3206HPP is the switch I am trying to get it to configure in to my...

Following this guide: https://www.tp-link.com/us/support/faq/2814/ The part it say you can batch config for the Management VLAN part is missing from the controller. Is there a newer guide? Because If...

@Clive_A If I were to configure my l3 to communicate with the ER8411 using OSPF routing would the ER8411 DPI and other stuff work? OSPF can pass routing and topology information to each area.

@Hank21 I am using the Linux(Ubuntu) controller Here is the controller's setting: Here is the site configuration: