MayLV2Online
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2019-01-07 06:26:33
Re:Cannot access TP Link Router anymore?
check your subnet mask, how can you access the router in another subnet? two solutions, set you first router's ip address to 192.168.1.12, or set the mask to 255.255.0.0
1HELPFULS
Forums/ Wi-Fi Routers
2019-01-04 01:55:42
Re:Archer C1200 as access point
if you do not connect the wan port, how shall the internet access LED turn on? access point is only work on layer 2 to forward packets, take little care of the LED status if it work fine.
0HELPFULS
Forums/ Wi-Fi Routers
2019-01-02 08:44:07
Re:Archer C9 firmware backup
are you finding the firmware 1.2.1 Build 20180328 rel.2212(4555) see this link and find it: https://www.tp-link.com/uk/download/Archer-C9.html#Firmware
0HELPFULS
Forums/ Wi-Fi Routers
2019-01-02 05:49:45
Re:Re:Re:Archer 1200AC C50 as access point
yes, though c50 is ac1200, but the wan port is only fast ethernet support 100M maybe you can find a new router with gigabit ethernet support 1000M, such as archer c1200 and one more thing, before you...
0HELPFULS
Forums/ Wi-Fi Routers
2019-01-02 05:40:36
Re:tplink tl-wr941nd
i think you can pick out the power cable, then pick in again, if still the problem, wait about 2 minute, then press the reset buttion for about 10 seconds
0HELPFULS
Forums/ Wi-Fi Routers
2018-12-29 06:08:42
Re:Archer 1200AC C50 as access point
c50 shall also have an option AP mode in the configuration interface, maybe you can check the hardware version and upgrade the firmware
0HELPFULS