MrTomLV1Online
Following: 0Followers: 0
Forums/ Routers
2023-11-08 20:59:45
Successful WireGuard tunnel works, but not one way when computer uses 2nd IP
I've been battling a VPN connection for a week now. Tried to get some help from this reddit thread. I have a WireGuard tunnel that can work both ways with DHCP or Static IPs on the same subnet. But...
0HELPFULS
Forums/ Routers
2023-10-30 21:30:15
Re:Help creating site-to-site using WireGuard with an ER605 to Archer AX55, or two ER605s
@Clive_A I decided to use two ER605s routers. I've read through the provided Guide, but I'm confused if both Peers, one from each side, need to connect to the other peer? i.e. Entering in an Endpoint...
0HELPFULS
Forums/ Routers
2023-10-25 16:08:26
Help creating site-to-site using WireGuard with an ER605 to Archer AX55, or two ER605s
I have an Archer AX55 v1.0-AX3000 (latest firmware) at the main office, behind another router using NAT. I've enabled the VPN server using WireGuard. I've forwarded the correct port to the Archer....
0HELPFULS
Forums/ Range Extenders
2018-12-22 06:13:01
Re:RE650 Access Point Mode - Iphone 8 / IOS 12.1 incompatibility issues
Hmm. I wonder if it's somehow related to an issue I had with my RE450 bridge. I have 2 gigabit LAN networks bridged using an RE450 in the livingroom (WiFi extension disbled, only bridge mode) and a...
0HELPFULS
Forums/ Range Extenders
2018-12-22 05:03:29
Re:Re:RE450 transmit vs receive speed
vampire_lady wrote So the speed between the router and your RE450 is 526, RE450 and computer is 336? Do you check wireless link speed of the wireless network card on your computer? Do you check...
1HELPFULS
Forums/ Range Extenders
2018-12-14 07:19:44
RE450 transmit vs receive speed
I just received my RE450 range extender yesterday. Updated it to the latest firmware (20171215-rel55534). I set it up in the livingroom going through a few walls about 30 feet away from the main...
0HELPFULS
12