Forums/
Pharos Wireless Bridges
2019-12-10 23:50:14
@R1D2 That's my exact initial thought...I'd essentially be asking from the other active WiFi systems to overprovide need-for-traffic on that specific 20mhz channel width which in turm would...
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-12-10 23:29:58
@R1D2 There's a thought to install a load balancing router on the remote site, which in turn will be connected to the two CPE510s...there's no such equipment installed yet.
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-12-10 23:04:51
@R1D2 Thanks for the quick reply...Do you have any suggestions as to how the load balancing router would be properly setup in such a ...setup?
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-12-10 22:57:57
Hi all, in an effort to improve a wireless link that began to suffer recently due to 5Ghz band saturation I was thinking if it is at all possible to use in that effect two CPE510s as clients being...
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-11-27 19:13:54
Hi all, according to FCC.io there were / are 3 distinct CPE610 models, namely: 01. 170909 / CPE610 - https://fccid.io/TE7CPE610 02. 180521 / CPE610v1 - https://fccid.io/TE7CPE610V1 03. 181018 /...
0HELPFULS
Forums/
Pharos Wireless Bridges
2019-07-19 18:47:45
..which brings me to yet another piece of oversimplified thought. Under the current f/w implementation the max Tx power for the CPE610 limited by the EIRP limit is 5dBm..Bearing in mind this is a...
0HELPFULS