screenshot the address bar of your safari. If it is not showing 127.0.0.1, that means there is another controller online in your LAN, and you are re-directed to that controller. As @apveening said,...

Dont use the PoE adapter and PoE switch at the same time. (If that is your case)

25mbps is not normal at a 5Ghz band. check these settings: If you are using a controller: 1. disable airtime fairness 2. disable rate limit 3. enable 11ac mode 4. enable wmm (QoS) in advanced...

Kockel wrote Yes, this is what I mean. Do the clients switch IP address immediately if they switch location (Same SSID, different location, different dhcp scope) In fact, they will. but how quick...

EAP330 requires 802.3at power supply. The most cost-effective choice for your scenario will be T1500G-10MPS. Or you can just use DC, as EAP330 also supports DC input. Note: EAP330 is 11ac wave1...

hi ed, have u enabled any advanced features besides the basic ssid settings? such as airtime fairness, rssi threshold, load balance, bandsteering, mesh, roaming?