@lynx_arnele03, if an AP which has been successfully configured by the controller goes into »Disconnect« state, it does not stop working. It's just not connected to the controller for whatever...

@mobb, EAP-Walls are meant to be placed into hotel rooms, seamless roaming makes no sense there. From the feature list of EAP230-Wall: Their signal strength / antenna gain is exactly adapted to this...

@JTJames, if it's really a reboot of OC200, could be caused by a weak USB power supply (e.g. a charger instead of a power supply). I recommend to always use PoE to power an OC200, either a PoE...

@Guardyan, additional note: If you are located in the EU, you should use EAP225-Outdoor even indoors as the root mesh node. Reason is that indoor-only channels (which an EAP225 indoor model can use)...

@Ueella, you can prevent it by using VLANs and two broadcast domains. See the HowTo here, read about the two methods for a guest network. If you have questions, feel free to post in this thread you...

@mobb, according to the manual you can assign the port(s) of the EAP-Wall models to a (one!) VLAN, yes.