Hi, Your router is probably bricked. May be you can try to reload the firmware with TFTP just after power up (you have only 3s to do it), but only if the boot-loader is not dead... After, only a JTAG...

A wireless client adapter is sufficient. I mentioned laptop to analyze the signal in different places...

It exists a Host Name parameter but only for the WAN port set in Dynamic IP ! A ticket is open for this issue, R&D seems working on it... Hope they will improve the firmware to the same level of my...

Hi, The best way to analyze/compare/measure a wifi signal is to use a laptop with Acrylic Wifi

ankitmodi wrote After successful firmware upgrade, all my configuration was lost so I had to restore the config file. There is a very important rule with a router: "after a firmware upgrade NEVER...

Daniel777 wrote I think is strange the US support site is not listing the last available version I noted the same situation with other countries... There is a more or less important delay...