benoitm974LV2Online
Following: 0Followers: 1
Forums/ Wi-Fi Routers
2024-09-06 22:00:21
Re:Why dnsmasq don't reply to local 'lan' request ?
@benoitm974 I think i found the answer in the beta firmware dnsproxy is wrtting a iptable rule to redirect every UDP and TCP traffic to port 53 of the tplinkwifi.net(192.168.x.x depending on which...
0HELPFULS
Forums/ Wi-Fi Routers
2024-09-06 12:36:26
Why dnsmasq don't reply to local 'lan' request ?
Hi running BE800 on my lan i don't get local name resolution for other machine connected via DHCP. If a machine request an IP to BE800 with a hostname 'machineA' then DNS should reply with locaip of...
0HELPFULS
Forums/ Wi-Fi Routers
2024-09-06 12:27:42
Re:BE800 SFP 2.5G Mode
@Kevin_Z Been using the latest Archer BE800_V1/V1.6_1.1.6_Build 240808 (Official Version) for 48h same issue cold start the SFP is 1Gps... You need to unplug and replug it for it to switch to...
0HELPFULS
Forums/ Feature Request (Routers)
2024-09-04 22:16:32
Add IPV6 proper rfc6603 support
The current ipv6 WAN client implementation lack support for https://datatracker.ietf.org/doc/html/rfc6603 The current option allow to check DHCP6 and prefix delegation, first the DHCP server won't...
0HELPFULS
Forums/ Wi-Fi Routers
2024-09-04 20:29:46
Re:SFP access through BE800
You might need to be more precise on the SFP you're trying to use are you talking about a GPON SFP+ with a MAC address that run a backend ? If so the BE800 doesn't bridge the SFP by default, so no......
1HELPFULS
Forums/ Wi-Fi Routers
2024-09-04 20:06:07
IPv6 DNS set to client rather than dnsmasq
Hi I'm facing an issue with how BE800 is managing DNS on the lan for ipv6. For ipv4 you get either your ISP DNS or manually entered ones and then they are added to the dnsmaq configuration and the...
0HELPFULS