R1D2 wrote In wireless setting you should be able to assign the SSID with a network ( GLAN or whatever you named it), this will create the link between ath1.1 and the WiFi interface (SSID). In...

R1D2 wrote . But what do you want to achieve with a bridge with only one interface assigned?. Agreed only one interface, but how or where would I assign that interface with a ssid?

Success.Able to dedicate Port 4 of the WRT54 (configured with a separate ssid) and have the CPE plugged into that port. All is working great, thanks to you R1D2. Now, if I can get the WRTAC1200...

20 hours later, give or take a few, I believe I've finally been able to dedicate a port with a separate ssid and ip address on the wrt54gs. Will know for sure later this evening early morning as I...

R1D2 wrote You need to find out the VLAN ID. On DD-WRT it is the second digit of the name of the Ethernet interface (e.g. eth0.3 means VLAN ID 3). The IP address is of no meaning here. Also, you did...

R1D2 wrote Not much different: DD-WRT is basically just a customized OpenWRT, which might be better suited for end-users. Of course DD-WRT has VLANs: http://www.dd-wrt.com/wiki/index.php/VLAN_Support...