Hi @Palmhead, Question #1: I don't think a pure AP Mesh solution is advisable (or even possible) based on the mesh guidelines: Minimize the number of APs connected to the same upstream link "Uplink...

Hi @Seef, You can use different model APs for the "mesh" as long as they support it. The TP-Link web site has conflicting information regarding the EAP615-Wall (sited below), but I'm guessing that it...

@MemoriesLP the "e" version is the Easy Smart flavor with the UI. Glad you're back to full speed.

Hi @MemoriesLP, Defaults on ports should be auto negotiation. The specs for EAP110 show that it only supports 100Mbps. Other devices such as IP cameras and smart TVs commonly use just 100MB...

Hi @NazariiLutsyk, Any damage to the eight small wires inside the AP's RJ45 port? 1000 Base-T requires all eight wires to be connected end to end, 100 Base-T needs just four. If any of the four extra...

Hi @pinkman, The only reason I can think of to get the same model is you can swap identical devices to isolate issues when troubleshooting. Otherwise you can just get any of the models that have the...