nicolatiLV2Online
Following: 0Followers: 0
Forums/ Controllers
2024-02-05 08:12:04
Re:Site-to-site VPN with one OC300 and Internet Gateway in DMZ
@Virgo Hi Virgo, yes, it will be in DMZ in both sites. Ok, let me mark this as solution for the time being and then I will try that once I have all components. Thank you, Fra
0HELPFULS
Forums/ Controllers
2024-02-04 18:20:50
Site-to-site VPN with one OC300 and Internet Gateway in DMZ
Hi all, I want to perform Site-to-Site VPN connection with one OC300 only and I'm trying to follow this FAQ: https://www.tp-link.com/it/support/faq/3640/ I don't have all the required components now,...
0HELPFULS
Forums/ WiFi
2024-02-02 23:21:31
Re:EAP653 is not able to give an IP if the VLAN is configured on a WLAN
@nicolati Hi all, I discovered the issue by chance! The problem is the Static Routing!!! When I created the VLANs, the Controller created me a Static Routing, one for each VLAN, like: 192.168.10.0/24...
0HELPFULS
Forums/ WiFi
2024-02-01 17:49:06
Re:iPhone does not connect to EAP610 after configuration
@Chris-Cross Hi Chris, does the iPhone get an IP ? Thank you, Fra
0HELPFULS
Forums/ Controllers
2024-01-28 17:18:57
Re:Built-in RADIUS Server doesn't follow VLAN ID
@MR.S Hi MR.S, this works!!! Now, it tries to give me an IP from the VLAN 2 and I'm back into the problem I'm following with the TP Link Support, but this feature works! Thanks a lot, Fra
0HELPFULS
Forums/ Controllers
2024-01-27 20:59:23
Built-in RADIUS Server doesn't follow VLAN ID
Hi all, I noticed that Built-in RADIUS Server lets the user specify which VLAN to be used for each MAC Address configured, but then it doesn't follow it... 2 things to notice this: 1) The IP assigned...
0HELPFULS
1567...