@Hank21 actually its connected using 4 cables each one for its own vlan this is the way it is connected in standalone mode with no problems the vlans in standalone are assigned to a single port but I...

@Hank21 My wans which are 4 are all configued this way This is VLAN20 which was the default and I changed it but I cant change the Lan interfaces on it oc200 WONT ALLOW IT I use this lan as a main...

@MR.S well I did get the oc200 configured in the oc200 4 wan connections show connected and 4 Vpn subnets but when I plug more then one of the vlan ports into my netgear 48 port smart poe switch...

Can the default vlan ip and vlan ID be changed Say from vlan 1 to vlan 20 I have 3 vlans on my network and would like to keep the same subnets IE vlan20, Vlan30 and vlan 40

@Clive_A I want to thank you for your responce but everything I do does not seem to work When I changed the ports the 8411 fans kicked up on high and the ports locked up if I disconnected the ports...

@Clive_A This is my stand alone working setup SFP+ WAN1 =wan 1 SFP+ WAN/LAN2 =wan2 SFP WAN/LAN3 wan3 SFP WAN/LAN4 wan4 1 LAN40 40 192.168.x.2 255.255.255.0 2 LAN30 30 192.168.x.2 255.255.255.0 3...