@JonnieBeGood I'm a little confused with I've tried another new EAP225 and that's just the same, so it's not the AP. You need to see what is different at that location, such as the switch port and...

@new8n Well, this new design brought a really important question. Why do you want to cover that area? You jumped from a central design that seems to be there are other CPEs 13km far, to a square...

@Joeb1 It's wrong, CPE210-A (in your figure) with 0.254 address cannot have the default gateway of 1.1. they should be in the same subnet. If you want two subnets to talk to each other, there should...

@new8n If you mean, you want to overcome the interference with fast roaming, these are completely two different concepts. Access Point is not like a torch that projects signal in one direction, the...

@OleksandrTsiruk It's very old post, but I put the solutions for those who are interested. You can set the rtsp stream setting with the VIGI Security manager, then write the code to get a snapshot....

@DiePoh Every time someone says, "I installed a new device" and "the connection is unstable", my mind goes to IP address settings issues. Can you check the obtained IP addresses of the EAPs and if...