Please consider adding the capability for firewall management, i.e. the ability to add/edit/delete individual firewall rules.

Highly recommended

The additional IoT network and the Device Isolation feature in the current firmware seem to be working well when the router is in Wireless Router mode. However in AP mode, the Device Isolation...

@Coco449 The AX3000 gets its IP address in one of two ways, either statically or dynamically. If it receives its IP address from the cable modem, without any intervention on your part, then it is a...

@Coco449 NAT stands for Network Address Translation. It allows your LAN to share a single internet IP address among your devices. On your router, it is enabled by default. Back to your problem, what...

@Coco449 The WAN IP and the LAN IP must be in different subnets if NAT is enabled. You should explain your connection setup in more detail if you are looking for help or suggestions.