jra11500LV3Offline
Following: 0Followers: 1
Forums/ Wi-Fi Routers
2024-04-25 14:50:25
Re:EasyMesh Ethernet Backhaul Failure after Satellite Router Reboot
@Marvin_S The range extender on the first floor is an RE700X(EU) V1.0 with firmware 1.1.4 Build 20230509 Rel. 78185. The range extender on the ground floor (the one that fails to reconnect to the...
0HELPFULS
Forums/ Wi-Fi Routers
2024-04-24 11:57:03
Re:EasyMesh Ethernet Backhaul Failure after Satellite Router Reboot
@Marvin_S Thank you for responding and showing an interest in this issue. First, the network topology is shown in the diagram below: The home has three levels and is constructed with concrete floors...
0HELPFULS
Forums/ Wi-Fi Routers
2024-04-23 20:12:06
Re:Satellite Router Clients List does not agree with Main Router
@Marvin_S Sounds like a good idea. Testing was done today and I will post the results tomorrow in the other thread.
0HELPFULS
Forums/ Wi-Fi Routers
2024-04-21 11:14:56
Satellite Router Clients List does not agree with Main Router
Minor bug: When comparing clients lists of the main and satellite routers, not all of the clients of the satellite router are shown in the GUI of the satellite router. For example, my main router’s...
0HELPFULS
Forums/ Wi-Fi Routers
2024-04-21 10:12:15
EasyMesh Ethernet Backhaul Failure after Satellite Router Reboot
After operating for almost two weeks, this morning the satellite router was not displaying all of its connected clients. I decided then to reboot the satellite router. The GUI of the satellite router...
0HELPFULS
Forums/ Wi-Fi Routers
2024-04-20 17:23:00
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Thody You might try the latest firmware for the AX55. Check this post for more info.
0HELPFULS
1141516...