Following this guide from the Support page. I want to setup VLANs and ACL to stop traffic from VLAN Test (30) to VLAN LAN(1). Mainly to stop VLAN Test to reach the TL-ER7206's admin page. I have VLAN...

@Hank21 > If you want to login the router from anywhere, you can put in 0.0.0.0/0 as the remote IP, so all IP that can communicate with your router WAN, will be able to open the router login page....

I have ER7206 and EAP620 HD connected to TL-SG1005P (unmanaged switch). Both are in standalone mode. I don't want to use OC200 or Omada SDN for this network setup. This screenshot came from EAP620HD...

@LittleBam How did you setup the Remote management? The user guide wasn't very clear for me.

ER7206 V1 on `192.168.20.0/24` with IP address `192.168.20.1` Remote management by a PC at the same subnet with IP address of `192.168.20.240/32` Is this correct? If not, I will probably be locked...

I want to compare it to Intel J4125 so I can use a small miniPC as the Omada controller on Windows or Linux. 2 cores 2 threads are sufficient, right?