@Hank21 Thanks for pointing that one out. so thats an UX/UI problem, please change the feature request as follows: this configuration should be part of the link-backup configuration or at least for a...

@KS_Peer when you need ISP failover or even load-balancing, that method wont work. Because a VLAN is nothing more than a virtual network, with its own subnet and routing. So if everything is VLAN10,...

@btx ok thats a nice ad, but how do I actually get those IPs? On the website I can only see the use of the app, there is no FAQ or so which could tell me how to find the actual IP of any server ?

@JRTDad just connect a WAN port of the ER605 to the LAN port of the Zyxel Router and disable WiFi on the ZyXel Router and change the internal subnet of the ER605 to a different 192.168.x subnet then...

@tl12 when you are using the standalone mode, you need to setup a link-backup rule for this to happen and then you can set online-detection. But you are limited to 1 minute of detection interval....

@Wuch the problem here is, that you MUST have different subnets on both sides of the ER605 router. Because it is a NAT-router and therefore translates all IP addresses from its LAN side to one single...