@ElvisV 2 things... we have to look at the signal strength of the client and look at the band its on. Goto the client list: click on the three dots on the right and check all columns. Check for...

@tim-hilt Click on the radio in the device list within the omada controller. goto config>advance> and its below.

@tim-hilt Also - if the device pulls too much power... the AP and daisy chain device will go into a boot loop.

@tim-hilt If you're using the controller/standalone mode, you have to enable the POE passthrough in the controller or GUI. Be careful on what youre powering... It pulls 11watts with POE off... Do the...

@OrangeStreet When IPS drops on the 8411, I'm buying a few! Can't wait!

@multiholle You can put one AP on every floor... right under each other, and let it all mesh. That's what I would do. Also crank up the power in the Radio Configs to High.