"AI" is a bit of an exaggeration, it simply scans for the lowest interference channels and creates a channel plan to minimize overlapping frequencies. It seems to work well though, it would be useful...

My EU EAP653 seems to be limited to 20dBm on both bands in standalone mode. Frequencies: * 5180 MHz [36] (20.0 dBm) * 5200 MHz [40] (20.0 dBm) * 5220 MHz [44] (20.0 dBm) ...

More power is not necessarily a good thing. Smartphones and most laptops max out at around 23dBm, so while those devices will see the AP, they won't be able to transmit back to it. This results in a...

@Tedd404 It's logical that that waking up devices that are otherwise in sleep mode is bad for battery life. The effects vary depending on the device and Wi-Fi chipset in use, but certainly it has an...

Hello, I have deployed a standalone EAP653 to provide coverage in a location where only a single AP is needed and a controller is overkill. However since deploying, I have received complaints about...

I was using PPSK without radius, two different keys, no MAC binding but each with a different VLAN assignment. Network topology: VLAN 10 - AP and Omada controller attached to this VLAN in untagged...