@UKJim @Hank21 Sounds like there needs to be a way to force the downstream 215 bridge unit to always be a remote endpoint (ie ignore any potential upstream connections via its ether ports and stay a...

@Hank21 The problem is he needs to mesh elsewhere on the site, in fact likely from the very 650 you asked him to disable! Things may have changed but as I recall mesh is a site wide setting, not per...

@UKJim Hmmm. That does sound like a bug! If not a bug, then possibly something you won't be able to work around in the remaining time unless @Hank21 can get you a quick beta load built that prevents...

@jedigrover Disabling mesh will likely have resolved the issue. You were probably creating loops which result in the port getting shutdown. However, this probably means there is a bug in the AP...

@UKJim If the 215RX bridge is anything like the TPlink wall APs which also have 3 LAN ports, one with POE, then they should just work as if they were ports of the same switch the 215TX is plugged...

@UnDiUdin IF you have a backup of the old controller AND IF you restore that backup to a new controller of the same or newer vintage (use the same just in case...you can download older controller...