@TechTrader 1- Set up a "Service type" port 3389 for RDP 2- Setup an IP group with the one external IP address you want to permit access to called AllowedIPgrp 3 - Setup an IP group with the RDP...

@Loran_K AX 10 doesnt support DFS channels, this is a hardware limitation not a firmware limitation. AX53 & AX73 for example, do support DFS channels

@nmos I think its the exact same issue - i was trying to put what is essentially another VPN server on the LAN and port forward / dmz vpn ports to it without success until i figured out the...

@nmos My thread here ER605 / 7206 - DMZ not working properly and long winded workaround - Business Community (tp-link.com) notes basically the same thing - VPNS do not tunnel through the ER605...

@kev100 "WAN Port" is just their term for a TCP / UDP port on the public (WAN) side of your connection. If forwarding their specific port to the internal port 443 isnt working but 443>443 is, then i...

@PeterHer Then you need to set up 1 (or two if you want) Access Control Lists Rule 1 - Block / LAN>LAN / Protect_From_VLAN / Destination_VLAN Rule 2 - Block / LAN>LAN / Destination_VLAN /...