@7ippy You probably should have adopted 1st before making any standalone changes. The adoption process uses its own set of internals to talk between the controller and the switch. Once its fully...

@Fleegle61....so...I figured I would try some tests to see what the deal was. I was able to get my NMS to collect data from the ER605 only if I used SNMP v3 and not 2c. Even though 2c is turned on,...

@Vyizis Interesting point that you have no issue with SNMP using the software controller but I have the issue with the hardware controller. @Fae should take a look into this one! Maybe its already a...

@Hank21 I am running the latest version on the router 1.20 and 5.0.30 on the controller. This has been an issue for quite a while. My SNMP server is able to monitor my EAP225, 2008 and 2210 with no...

Anyone been able to successfully get your SNMP agent to talk to the ER605 or OC200?

@Fleegle61 with an update..... I figured I would wait for a while to see if any of the firmware updates would take care of this problem. Unfortunately, I still cannot monitor my router or controller...